Fellowes Vega 2 A3 Wartungshandbuch PDF herunterladen (Seite 4)

CAPABILITIES

ENGLISH

- Plug the machine into an easily accessible socket.

- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.

DO ensure the machine is on a stable surface.

DO test laminate scrap sheets and set the machine before final laminations.

DO remove staples and other metal articles prior to laminating.

DO keep the machine away from heat and water sources.

DO turn off the machine after each use.

DO unplug the machine when not in use for an extended period.

DO use pouches designed for use at the appropriate settings.

DO keep away from pets, while in use.

DO NOT leave the power cord in contact with hot surfaces.

DO NOT leave power cord hanging from cupboards or shelves.

DO NOT use appliance if the power cord is damaged.

DO NOT attempt to open or otherwise repair the machine.

DO NOT exceed the machines quoted performance.

DO NOT allow children to use this machine without adult supervision.

DO NOT laminate sharp or metal objects (eg: staples, paper clips).

DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc).

DO NOT laminate with self-adhesive pouches which require a cold setting.

DO NOT laminate an empty pouch.

IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE

LAMINATOR CONTROLS

A On / off switch

B Power on button

C Temp button

D Reverse button

E Carry handle

F Pouch / document entry slot

G Entry support shelf

H Pouch / document exit

I Illuminated user interface

J Exit tray (Neptune 2 only)

‘Pouch Protection’ function

The machine includes two ‘Auto-reverse’ functions designed to protect the

laminating pouch. When in use, the machine will:

(1) scan the pouch for creases and errors in loading.

(2) to check for blockages debris within the mechanism

When these errors are detected the machine will automatically operate in

reverse for (1) 5 seconds or (2) 20 seconds to eject any pouch.

‘Safe Start’ function

When switched on, the machine has a default ‘Safe Start’ function which

always starts up at the 80 micron setting. You may select other hot tempera-

ture settings if required. The machine will warm-up and alert the user when

it is ready.

‘Sleep Mode’ function

If the machine is not active for 30 minutes, the ‘Sleep Mode’ function will

place the machine into standby mode. To operate the machine, press the

‘Power On’ button on the control panel.

• For best results, use Fellowes ® brand pouches:

Enhance 80, Impress 100, Capture 125, (Neptune 2 can also use Protect 175

pouches).

• For self-adhesive (cold pouches) only use the cold setting.

• This machine does not need a carrier to laminate. It is a carrier-free

mechanism.

• Always put the item to be laminated into the appropriate sized pouch.

• Always test laminate with a similar size and thickness before final process.

• Prepare pouch and item for lamination. Place item within pouch centred

and touching the leading sealed edge. Ensure the pouch is not too large for

the item.

• If required, trim excess material from around the item after lamination and

cooling.

• When working with different pouch thickness’ (temperature settings) it is

recommended to first start with the thinnest pouches.

FEATURES & TIPS

Performance

Format A3

Entry width 320 mm

Pouch thickness (min) 75 microns (per side)

Pouch thickness (max) 125 microns (per side)

[Neptune 2 = 175 microns]

Warm up time (estimate) minimum 3 minutes

Cool down time 30-60 minutes

Lamination speed (+/- 5%) approx. 45cm/min (fixed speed)

Number of rollers 4

Ready indication Light & beep

Auto & manual reverse function Yes

Clear Path / Anti-jam engine Yes

LED interface Yes

Sleep mode Yes (30 minutes)

Photo-capable Yes

Carrier-free Yes

Carry handles Yes

Exit tray Neptune 2 only

Technical Data

Voltage / Frequency / Current(Amps) 220-240V AC, 50/60Hz, 3.33~3.65A

Wattage 800 Watts

Dimensions (HxWxD) 574 x 179 x 128 mm

Net weight 4.7 kg

Max document thickness

(laminating capacity) 0.7 mm

1 2 3 4 5 6 7 8 9 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Fellowes Vega 2 A3 Wartungshandbuch Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Laminatoren Fellowes Vega 2 A3